AudioLineOut Recalls Studio Six Headphone Amplifiers Due to Risk of Serious Injury or Death from Electrocution Hazard
FINDARECALL QUICK READ
What this record tells you
This CPSC record concerns AudioLineOut Recalls Studio Six Headphone Amplifiers Due to Risk of Serious Injury or Death from Electrocution Hazard. Use the source fields below to narrow the match, then verify the exact item and current remedy on the issuing-agency page.
- Status: Published
- Recall date: 2026-08-27
Compare model, item/style number, serial range, manufacturing date, importer, retailer, color, and other physical identifiers listed in the notice.
A CPSC photograph may show only one variation, so use the model/serial information and remedy instructions as the stronger match.
Product Description & Identification
This recall involves Studio Six Headphone Amplifiers with model ST6. The amplifiers are black or silver. The amplifiers measure 15-3/4 inches high by 12 inches wide. The height for the lower level of the unit, top to bottom, is 5-3/4 inches; the height from the top of the upper level to bottom of the unit is 20-3/4 inches. In the front of the unit, there are four audio connectors for headphones. In the back, there are three sets (L and R) of RCA inputs. Also in the back is a connector for an auxiliary power device.
Reason for Recall / Hazard Identified
Hazard: When the amplifiers are used with aftermarket metal base tubes, the bare metal can become electrified, posing a risk of serious injury or death from electrocution.. This recall involves Studio Six Headphone Amplifiers with model ST6. The amplifiers are black or silver. The amplifiers measure 15-3/4 inches high by 12 inches wide. The height for the lower level of the unit, top to bottom, is 5-3/4 inches; the height from the top of the upper level to bottom of the unit is 20-3/4 inches. In the front of the unit, there are four audio connectors for headphones. In the back, there are three sets (L and R) of RCA inputs. Also in the back is a connector for an auxiliary power device.
How to Check Whether Your Product Matches
A matching product name or photograph is not enough by itself. Compare every identifier available on your item or packaging with the official notice.
- Confirm the full product and brand or recalling-firm name.
- Compare package size, color, flavor, model, style, or configuration when listed.
- Check UPC, lot, batch, serial, date code, recall number, or USDA establishment number.
- Review the recall date and distribution information without assuming every seller is listed.
- Open the official CPSC source below and follow its current instructions.
If a required identifier is missing, contact the recalling company or issuing agency through the official notice rather than guessing.
Consumer Action Recorded in the Source
Source-Provided Product Images
Image limitation: An image may show only one package, color, size, or model. Do not use a photograph alone to decide whether your product is affected.
Verify With the Issuing Agency
This record was last updated in our index on 2026-09-10 04:30:02 UTC. Because recall enforcement statuses and instructions evolve, always verify details directly with the issuing government agency.
Open CPSC Source Record →Record Transparency
- Issuing agency
- CPSC
- Source ID
- CPSC-e1c4b39d1729d323f5cc6451d3a7
- Indexed update
- 2026-09-10 04:30:02 UTC
- Official source
- Open issuing-agency record